com.amazonaws.services.cloudwatch

Interface AmazonCloudWatch

All Known Subinterfaces:

AmazonCloudWatchAsync

All Known Implementing Classes:

AmazonCloudWatchAsyncClient, AmazonCloudWatchClient

public interface AmazonCloudWatch

Interface for accessing Amazon CloudWatch

Amazon CloudWatch monitors your Amazon Web Services (AWS) resources and the applications you run on AWS in real-time. You can use CloudWatch to collect and track metrics, which are the variables you want to measure for your resources and applications.

CloudWatch alarms send notifications or automatically make changes to the resources you are monitoring based on rules that you define. For example, you can monitor the CPU usage and disk reads and writes of your Amazon Elastic Compute Cloud (Amazon EC2) instances and then use this data to determine whether you should launch additional instances to handle increased load. You can also use this data to stop under-used instances to save money.

In addition to monitoring the built-in metrics that come with AWS, you can monitor your own custom metrics. With CloudWatch, you gain system-wide visibility into resource utilization, application performance, and operational health.

Method Summary

Modifier and Type	Method and Description
void	deleteAlarms(DeleteAlarmsRequest deleteAlarmsRequest) Deletes all specified alarms.
DescribeAlarmHistoryResult	describeAlarmHistory() Retrieves history for the specified alarm.
DescribeAlarmHistoryResult	describeAlarmHistory(DescribeAlarmHistoryRequest describeAlarmHistoryRequest) Retrieves history for the specified alarm.
DescribeAlarmsResult	describeAlarms() Retrieves alarms with the specified names.
DescribeAlarmsResult	describeAlarms(DescribeAlarmsRequest describeAlarmsRequest) Retrieves alarms with the specified names.
DescribeAlarmsForMetricResult	describeAlarmsForMetric(DescribeAlarmsForMetricRequest describeAlarmsForMetricRequest) Retrieves all alarms for a single metric.
void	disableAlarmActions(DisableAlarmActionsRequest disableAlarmActionsRequest) Disables actions for the specified alarms.
void	enableAlarmActions(EnableAlarmActionsRequest enableAlarmActionsRequest) Enables actions for the specified alarms.
ResponseMetadata	getCachedResponseMetadata(AmazonWebServiceRequest request) Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
GetMetricStatisticsResult	getMetricStatistics(GetMetricStatisticsRequest getMetricStatisticsRequest) Gets statistics for the specified metric.
ListMetricsResult	listMetrics() Returns a list of valid metrics stored for the AWS account owner.
ListMetricsResult	listMetrics(ListMetricsRequest listMetricsRequest) Returns a list of valid metrics stored for the AWS account owner.
void	putMetricAlarm(PutMetricAlarmRequest putMetricAlarmRequest) Creates or updates an alarm and associates it with the specified Amazon CloudWatch metric.
void	putMetricData(PutMetricDataRequest putMetricDataRequest) Publishes metric data points to Amazon CloudWatch.
void	setAlarmState(SetAlarmStateRequest setAlarmStateRequest) Temporarily sets the state of an alarm.
void	setEndpoint(java.lang.String endpoint) Overrides the default endpoint for this client ("https://monitoring.us-east-1.amazonaws.com").
void	setRegion(Region region) An alternative to setEndpoint(String), sets the regional endpoint for this client's service calls.
void	shutdown() Shuts down this client object, releasing any resources that might be held open.

Method Detail

setEndpoint

void setEndpoint(java.lang.String endpoint)
          throws java.lang.IllegalArgumentException

Overrides the default endpoint for this client ("https://monitoring.us-east-1.amazonaws.com"). Callers can use this method to control which AWS region they want to work with.

Callers can pass in just the endpoint (ex: "monitoring.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "https://monitoring.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol from this client's ClientConfiguration will be used, which by default is HTTPS.

For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: http://developer.amazonwebservices.com/connect/entry.jspa?externalID= 3912

This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.

Parameters:

endpoint - The endpoint (ex: "monitoring.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "https://monitoring.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate with.

Throws:

java.lang.IllegalArgumentException - If any problems are detected with the specified endpoint.

setRegion

void setRegion(Region region)
        throws java.lang.IllegalArgumentException

An alternative to setEndpoint(String), sets the regional endpoint for this client's service calls. Callers can use this method to control which AWS region they want to work with.

By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the ClientConfiguration supplied at construction.

This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.

Parameters:

region - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions) for accessing a given region.

Throws:

java.lang.IllegalArgumentException - If the given region is null, or if this service isn't available in the given region. See Region.isServiceSupported(String)

See Also:

Region.getRegion(com.amazonaws.regions.Regions), Region.createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)

deleteAlarms

void deleteAlarms(DeleteAlarmsRequest deleteAlarmsRequest)
           throws AmazonClientException,
                  AmazonServiceException

Deletes all specified alarms. In the event of an error, no alarms are deleted.

Parameters:

deleteAlarmsRequest -

Throws:

ResourceNotFoundException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

describeAlarmHistory

DescribeAlarmHistoryResult describeAlarmHistory(DescribeAlarmHistoryRequest describeAlarmHistoryRequest)
                                         throws AmazonClientException,
                                                AmazonServiceException

Retrieves history for the specified alarm. Filter alarms by date range or item type. If an alarm name is not specified, Amazon CloudWatch returns histories for all of the owner's alarms.

Amazon CloudWatch retains the history of an alarm for two weeks, whether or not you delete the alarm.

Parameters:

describeAlarmHistoryRequest -

Returns:

describeAlarmHistoryResult The response from the DescribeAlarmHistory service method, as returned by Amazon CloudWatch.

Throws:

InvalidNextTokenException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

describeAlarms

DescribeAlarmsResult describeAlarms(DescribeAlarmsRequest describeAlarmsRequest)
                             throws AmazonClientException,
                                    AmazonServiceException

Retrieves alarms with the specified names. If no name is specified, all alarms for the user are returned. Alarms can be retrieved by using only a prefix for the alarm name, the alarm state, or a prefix for any action.

Parameters:

describeAlarmsRequest -

Returns:

describeAlarmsResult The response from the DescribeAlarms service method, as returned by Amazon CloudWatch.

Throws:

InvalidNextTokenException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

describeAlarmsForMetric

DescribeAlarmsForMetricResult describeAlarmsForMetric(DescribeAlarmsForMetricRequest describeAlarmsForMetricRequest)
                                               throws AmazonClientException,
                                                      AmazonServiceException

Retrieves all alarms for a single metric. Specify a statistic, period, or unit to filter the set of alarms further.

Parameters:

describeAlarmsForMetricRequest -

Returns:

describeAlarmsForMetricResult The response from the DescribeAlarmsForMetric service method, as returned by Amazon CloudWatch.

Throws:

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

disableAlarmActions

void disableAlarmActions(DisableAlarmActionsRequest disableAlarmActionsRequest)
                  throws AmazonClientException,
                         AmazonServiceException

Disables actions for the specified alarms. When an alarm's actions are disabled the alarm's state may change, but none of the alarm's actions will execute.

Parameters:

disableAlarmActionsRequest -

Throws:

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

enableAlarmActions

void enableAlarmActions(EnableAlarmActionsRequest enableAlarmActionsRequest)
                 throws AmazonClientException,
                        AmazonServiceException

Enables actions for the specified alarms.

Parameters:

enableAlarmActionsRequest -

Throws:

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

getMetricStatistics

GetMetricStatisticsResult getMetricStatistics(GetMetricStatisticsRequest getMetricStatisticsRequest)
                                       throws AmazonClientException,
                                              AmazonServiceException

Gets statistics for the specified metric.

The maximum number of data points that can be queried is 50,850, whereas the maximum number of data points returned from a single GetMetricStatistics request is 1,440. If you make a request that generates more than 1,440 data points, Amazon CloudWatch returns an error. In such a case, you can alter the request by narrowing the specified time range or increasing the specified period. Alternatively, you can make multiple requests across adjacent time ranges. GetMetricStatistics does not return the data in chronological order.

Amazon CloudWatch aggregates data points based on the length of the period that you specify. For example, if you request statistics with a one-minute granularity, Amazon CloudWatch aggregates data points with time stamps that fall within the same one-minute period. In such a case, the data points queried can greatly outnumber the data points returned.

The following examples show various statistics allowed by the data point query maximum of 50,850 when you call GetMetricStatistics on Amazon EC2 instances with detailed (one-minute) monitoring enabled:

• Statistics for up to 400 instances for a span of one hour
• Statistics for up to 35 instances over a span of 24 hours
• Statistics for up to 2 instances over a span of 2 weeks

For information about the namespace, metric names, and dimensions that other Amazon Web Services products use to send metrics to CloudWatch, go to Amazon CloudWatch Metrics, Namespaces, and Dimensions Reference in the Amazon CloudWatch Developer Guide.

Parameters:

getMetricStatisticsRequest -

Returns:

getMetricStatisticsResult The response from the GetMetricStatistics service method, as returned by Amazon CloudWatch.

Throws:

InvalidParameterValueException

MissingRequiredParameterException

InvalidParameterCombinationException

InternalServiceException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

listMetrics

ListMetricsResult listMetrics(ListMetricsRequest listMetricsRequest)
                       throws AmazonClientException,
                              AmazonServiceException

Returns a list of valid metrics stored for the AWS account owner. Returned metrics can be used with GetMetricStatistics to obtain statistical data for a given metric.

Up to 500 results are returned for any one call. To retrieve further results, use returned NextToken values with subsequent ListMetrics operations. If you create a metric with the PutMetricData action, allow up to fifteen minutes for the metric to appear in calls to the ListMetrics action. Statistics about the metric, however, are available sooner using GetMetricStatistics.

Parameters:

listMetricsRequest -

Returns:

listMetricsResult The response from the ListMetrics service method, as returned by Amazon CloudWatch.

Throws:

InternalServiceException

InvalidParameterValueException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

putMetricAlarm

void putMetricAlarm(PutMetricAlarmRequest putMetricAlarmRequest)
             throws AmazonClientException,
                    AmazonServiceException

Creates or updates an alarm and associates it with the specified Amazon CloudWatch metric. Optionally, this operation can associate one or more Amazon Simple Notification Service resources with the alarm.

When this operation creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA. The alarm is evaluated and its StateValue is set appropriately. Any actions associated with the StateValue is then executed.

When updating an existing alarm, its StateValue is left unchanged. If you are using an AWS Identity and Access Management (IAM) account to create or modify an alarm, you must have the following Amazon EC2 permissions:

• ec2:DescribeInstanceStatus and ec2:DescribeInstances for all alarms on Amazon EC2 instance status metrics.
• ec2:StopInstances for alarms with stop actions.
• ec2:TerminateInstances for alarms with terminate actions.
• ec2:DescribeInstanceRecoveryAttribute, and ec2:RecoverInstances for alarms with recover actions.

If you have read/write permissions for Amazon CloudWatch but not for Amazon EC2, you can still create an alarm but the stop or terminate actions won't be performed on the Amazon EC2 instance. However, if you are later granted permission to use the associated Amazon EC2 APIs, the alarm actions you created earlier will be performed. For more information about IAM permissions, see Permissions and Policies in Using IAM.

If you are using an IAM role (e.g., an Amazon EC2 instance profile), you cannot stop or terminate the instance using alarm actions. However, you can still see the alarm state and perform any other actions such as Amazon SNS notifications or Auto Scaling policies.

If you are using temporary security credentials granted using the AWS Security Token Service (AWS STS), you cannot stop or terminate an Amazon EC2 instance using alarm actions.

Parameters:

putMetricAlarmRequest -

Throws:

LimitExceededException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

putMetricData

void putMetricData(PutMetricDataRequest putMetricDataRequest)
            throws AmazonClientException,
                   AmazonServiceException

Publishes metric data points to Amazon CloudWatch. Amazon CloudWatch associates the data points with the specified metric. If the specified metric does not exist, Amazon CloudWatch creates the metric. When Amazon CloudWatch creates a metric, it can take up to fifteen minutes for the metric to appear in calls to the ListMetrics action.

Each PutMetricData request is limited to 8 KB in size for HTTP GET requests and is limited to 40 KB in size for HTTP POST requests.

Although the Value parameter accepts numbers of type Double, Amazon CloudWatch rejects values that are either too small or too large. Values must be in the range of 8.515920e-109 to 1.174271e+108 (Base 10) or 2e-360 to 2e360 (Base 2). In addition, special values (e.g., NaN, +Infinity, -Infinity) are not supported.

Data that is timestamped 24 hours or more in the past may take in excess of 48 hours to become available from submission time using GetMetricStatistics.

Parameters:

putMetricDataRequest -

Throws:

InvalidParameterValueException

MissingRequiredParameterException

InvalidParameterCombinationException

InternalServiceException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

setAlarmState

void setAlarmState(SetAlarmStateRequest setAlarmStateRequest)
            throws AmazonClientException,
                   AmazonServiceException

Temporarily sets the state of an alarm. When the updated StateValue differs from the previous value, the action configured for the appropriate state is invoked. For example, if your alarm is configured to send an Amazon SNS message when an alarm is triggered, temporarily changing the alarm's state to ALARM will send an Amazon SNS message. This is not a permanent change. The next periodic alarm check (in about a minute) will set the alarm to its actual state. Because the alarm state change happens very quickly, it is typically only visibile in the alarm's History tab in the Amazon CloudWatch console or through DescribeAlarmHistory.

Parameters:

setAlarmStateRequest -

Throws:

ResourceNotFoundException

InvalidFormatException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

listMetrics

ListMetricsResult listMetrics()
                       throws AmazonClientException,
                              AmazonServiceException

Returns a list of valid metrics stored for the AWS account owner. Returned metrics can be used with GetMetricStatistics to obtain statistical data for a given metric.

Up to 500 results are returned for any one call. To retrieve further results, use returned NextToken values with subsequent ListMetrics operations. If you create a metric with the PutMetricData action, allow up to fifteen minutes for the metric to appear in calls to the ListMetrics action. Statistics about the metric, however, are available sooner using GetMetricStatistics.

Returns:

listMetricsResult The response from the ListMetrics service method, as returned by Amazon CloudWatch.

Throws:

InternalServiceException

InvalidParameterValueException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

describeAlarms

DescribeAlarmsResult describeAlarms()
                             throws AmazonClientException,
                                    AmazonServiceException

Retrieves alarms with the specified names. If no name is specified, all alarms for the user are returned. Alarms can be retrieved by using only a prefix for the alarm name, the alarm state, or a prefix for any action.

Returns:

describeAlarmsResult The response from the DescribeAlarms service method, as returned by Amazon CloudWatch.

Throws:

InvalidNextTokenException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

describeAlarmHistory

DescribeAlarmHistoryResult describeAlarmHistory()
                                         throws AmazonClientException,
                                                AmazonServiceException

Retrieves history for the specified alarm. Filter alarms by date range or item type. If an alarm name is not specified, Amazon CloudWatch returns histories for all of the owner's alarms.

Amazon CloudWatch retains the history of an alarm for two weeks, whether or not you delete the alarm.

Returns:

describeAlarmHistoryResult The response from the DescribeAlarmHistory service method, as returned by Amazon CloudWatch.

Throws:

InvalidNextTokenException

AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.

AmazonServiceException - If an error response is returned by Amazon CloudWatch indicating either a problem with the data in the request, or a server side issue.

shutdown

void shutdown()

Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.

getCachedResponseMetadata

ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)

Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.

Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.

Parameters:

request - The originally executed request.

Returns:

The response metadata for the specified request, or null if none is available.