AmazonSQSBufferedAsyncClient (AWS SDK for Android

java.lang.Object
- com.amazonaws.services.sqs.buffered.AmazonSQSBufferedAsyncClient

All Implemented Interfaces:

AmazonSQS, AmazonSQSAsync
```
public class AmazonSQSBufferedAsyncClient
extends java.lang.Object
implements AmazonSQSAsync
```
AmazonSQSBufferedAsyncClient provides client-side batching of outgoing sendMessage, deleteMessage and changeMessageVisibility calls.
After receiving a call, rather than executing it right away, this client waits for a configurable period of time ( default=200ms) for other calls of the same type to come in; if such calls do come in, they are also not executed immediately, but instead are added to the batch. When the batch becomes full or the timeout period expires, the entire batch is executed at once and the results are returned to the callers. This method of operation leads to reduced operating costs (since SQS charges per call and fewer calls are made) and increased overall throughput (since more work is performed per call, and all fixed costs of making a call are amortized over a greater amount of work). The cost of this method is increased latency for individual calls, since calls spend some time waiting on the client side for the potential batch-mates to appear before they are actually executed.
This client also performs pre-fetching of messages from SQS. After the first receiveMessage call is made, the client attempts not only to satisfy that call, but also pre-fetch extra messages to store in a temporary buffer. Future receiveMessage calls will be satisfied from the buffer, and only if the buffer is empty will the calling thread have to wait for the messages to be fetched. The size of the buffer and the maximum number of threads used for prefetching are configurable.
AmazonSQSBufferedAsyncClient is thread-safe.

Field Summary

Fields
Modifier and Type Field and Description

static java.lang.String USER_AGENT

Fields
Modifier and Type	Field and Description
`static java.lang.String`	`USER_AGENT`

Constructor Summary

Constructors
Constructor and Description
`AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS)`
`AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS, QueueBufferConfig config)`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`void`	`addPermission(AddPermissionRequest addPermissionRequest)` Adds a permission to a queue for a specific principal.
`void`	`addPermission(java.lang.String queueUrl, java.lang.String label, java.util.List<java.lang.String> aWSAccountIds, java.util.List<java.lang.String> actions)` Adds a permission to a queue for a specific principal.
`java.util.concurrent.Future<java.lang.Void>`	`addPermissionAsync(AddPermissionRequest addPermissionRequest)` Adds a permission to a queue for a specific principal.
`java.util.concurrent.Future<java.lang.Void>`	`addPermissionAsync(AddPermissionRequest addPermissionRequest, AsyncHandler<AddPermissionRequest,java.lang.Void> asyncHandler)` Adds a permission to a queue for a specific principal.
`void`	`changeMessageVisibility(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)` Changes the visibility timeout of a specified message in a queue to a new value.
`void`	`changeMessageVisibility(java.lang.String queueUrl, java.lang.String receiptHandle, java.lang.Integer visibilityTimeout)` Changes the visibility timeout of a specified message in a queue to a new value.
`java.util.concurrent.Future<java.lang.Void>`	`changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)` Changes the visibility timeout of a specified message in a queue to a new value.
`java.util.concurrent.Future<java.lang.Void>`	`changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest, AsyncHandler<ChangeMessageVisibilityRequest,java.lang.Void> asyncHandler)` Changes the visibility timeout of a specified message in a queue to a new value.
`ChangeMessageVisibilityBatchResult`	`changeMessageVisibilityBatch(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)` Changes the visibility timeout of multiple messages.
`ChangeMessageVisibilityBatchResult`	`changeMessageVisibilityBatch(java.lang.String queueUrl, java.util.List<ChangeMessageVisibilityBatchRequestEntry> entries)` Changes the visibility timeout of multiple messages.
`java.util.concurrent.Future<ChangeMessageVisibilityBatchResult>`	`changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)` Changes the visibility timeout of multiple messages.
`java.util.concurrent.Future<ChangeMessageVisibilityBatchResult>`	`changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest, AsyncHandler<ChangeMessageVisibilityBatchRequest,ChangeMessageVisibilityBatchResult> asyncHandler)` Changes the visibility timeout of multiple messages.
`CreateQueueResult`	`createQueue(CreateQueueRequest createQueueRequest)` Creates a new standard or FIFO queue or returns the URL of an existing queue.
`CreateQueueResult`	`createQueue(java.lang.String queueName)` Creates a new standard or FIFO queue or returns the URL of an existing queue.
`java.util.concurrent.Future<CreateQueueResult>`	`createQueueAsync(CreateQueueRequest createQueueRequest)` Creates a new standard or FIFO queue or returns the URL of an existing queue.
`java.util.concurrent.Future<CreateQueueResult>`	`createQueueAsync(CreateQueueRequest createQueueRequest, AsyncHandler<CreateQueueRequest,CreateQueueResult> asyncHandler)` Creates a new standard or FIFO queue or returns the URL of an existing queue.
`void`	`deleteMessage(DeleteMessageRequest deleteMessageRequest)` Deletes the specified message from the specified queue.
`void`	`deleteMessage(java.lang.String queueUrl, java.lang.String receiptHandle)` Deletes the specified message from the specified queue.
`java.util.concurrent.Future<java.lang.Void>`	`deleteMessageAsync(DeleteMessageRequest deleteMessageRequest)` Deletes the specified message from the specified queue.
`java.util.concurrent.Future<java.lang.Void>`	`deleteMessageAsync(DeleteMessageRequest deleteMessageRequest, AsyncHandler<DeleteMessageRequest,java.lang.Void> asyncHandler)` Deletes the specified message from the specified queue.
`DeleteMessageBatchResult`	`deleteMessageBatch(DeleteMessageBatchRequest deleteMessageBatchRequest)` Deletes up to ten messages from the specified queue.
`DeleteMessageBatchResult`	`deleteMessageBatch(java.lang.String queueUrl, java.util.List<DeleteMessageBatchRequestEntry> entries)` Deletes up to ten messages from the specified queue.
`java.util.concurrent.Future<DeleteMessageBatchResult>`	`deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest)` Deletes up to ten messages from the specified queue.
`java.util.concurrent.Future<DeleteMessageBatchResult>`	`deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest, AsyncHandler<DeleteMessageBatchRequest,DeleteMessageBatchResult> asyncHandler)` Deletes up to ten messages from the specified queue.
`void`	`deleteQueue(DeleteQueueRequest deleteQueueRequest)` Deletes the queue specified by the queue URL, regardless of whether the queue is empty.
`void`	`deleteQueue(java.lang.String queueUrl)` Deletes the queue specified by the queue URL, regardless of whether the queue is empty.
`java.util.concurrent.Future<java.lang.Void>`	`deleteQueueAsync(DeleteQueueRequest deleteQueueRequest)` Deletes the queue specified by the queue URL, regardless of whether the queue is empty.
`java.util.concurrent.Future<java.lang.Void>`	`deleteQueueAsync(DeleteQueueRequest deleteQueueRequest, AsyncHandler<DeleteQueueRequest,java.lang.Void> asyncHandler)` Deletes the queue specified by the queue URL, regardless of whether the queue is empty.
`ResponseMetadata`	`getCachedResponseMetadata(AmazonWebServiceRequest request)` Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
`GetQueueAttributesResult`	`getQueueAttributes(GetQueueAttributesRequest getQueueAttributesRequest)` Gets attributes for the specified queue.
`GetQueueAttributesResult`	`getQueueAttributes(java.lang.String queueUrl, java.util.List<java.lang.String> attributeNames)` Gets attributes for the specified queue.
`java.util.concurrent.Future<GetQueueAttributesResult>`	`getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest)` Gets attributes for the specified queue.
`java.util.concurrent.Future<GetQueueAttributesResult>`	`getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest, AsyncHandler<GetQueueAttributesRequest,GetQueueAttributesResult> asyncHandler)` Gets attributes for the specified queue.
`GetQueueUrlResult`	`getQueueUrl(GetQueueUrlRequest getQueueUrlRequest)` Returns the URL of an existing queue.
`GetQueueUrlResult`	`getQueueUrl(java.lang.String queueName)` Returns the URL of an existing queue.
`java.util.concurrent.Future<GetQueueUrlResult>`	`getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest)` Returns the URL of an existing queue.
`java.util.concurrent.Future<GetQueueUrlResult>`	`getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest, AsyncHandler<GetQueueUrlRequest,GetQueueUrlResult> asyncHandler)` Returns the URL of an existing queue.
`ListDeadLetterSourceQueuesResult`	`listDeadLetterSourceQueues(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)` Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
`java.util.concurrent.Future<ListDeadLetterSourceQueuesResult>`	`listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)` Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
`java.util.concurrent.Future<ListDeadLetterSourceQueuesResult>`	`listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest, AsyncHandler<ListDeadLetterSourceQueuesRequest,ListDeadLetterSourceQueuesResult> asyncHandler)` Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
`ListQueuesResult`	`listQueues()` Returns a list of your queues.
`ListQueuesResult`	`listQueues(ListQueuesRequest listQueuesRequest)` Returns a list of your queues.
`ListQueuesResult`	`listQueues(java.lang.String queueNamePrefix)` Returns a list of your queues.
`java.util.concurrent.Future<ListQueuesResult>`	`listQueuesAsync(ListQueuesRequest listQueuesRequest)` Returns a list of your queues.
`java.util.concurrent.Future<ListQueuesResult>`	`listQueuesAsync(ListQueuesRequest listQueuesRequest, AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)` Returns a list of your queues.
`void`	`purgeQueue(PurgeQueueRequest purgeQueueRequest)` Deletes the messages in a queue specified by the queue URL.
`java.util.concurrent.Future<java.lang.Void>`	`purgeQueueAsync(PurgeQueueRequest purgeQueueRequest)` Deletes the messages in a queue specified by the queue URL.
`java.util.concurrent.Future<java.lang.Void>`	`purgeQueueAsync(PurgeQueueRequest purgeQueueRequest, AsyncHandler<PurgeQueueRequest,java.lang.Void> asyncHandler)` Deletes the messages in a queue specified by the queue URL.
`ReceiveMessageResult`	`receiveMessage(ReceiveMessageRequest receiveMessageRequest)` Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue.
`ReceiveMessageResult`	`receiveMessage(java.lang.String queueUrl)` Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue.
`java.util.concurrent.Future<ReceiveMessageResult>`	`receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest)` Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue.
`java.util.concurrent.Future<ReceiveMessageResult>`	`receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest, AsyncHandler<ReceiveMessageRequest,ReceiveMessageResult> asyncHandler)` Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue.
`void`	`removePermission(RemovePermissionRequest removePermissionRequest)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`void`	`removePermission(java.lang.String queueUrl, java.lang.String label)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`java.util.concurrent.Future<java.lang.Void>`	`removePermissionAsync(RemovePermissionRequest removePermissionRequest)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`java.util.concurrent.Future<java.lang.Void>`	`removePermissionAsync(RemovePermissionRequest removePermissionRequest, AsyncHandler<RemovePermissionRequest,java.lang.Void> asyncHandler)` Revokes any permissions in the queue policy that matches the specified `Label` parameter.
`SendMessageResult`	`sendMessage(SendMessageRequest sendMessageRequest)` Delivers a message to the specified queue.
`SendMessageResult`	`sendMessage(java.lang.String queueUrl, java.lang.String messageBody)` Delivers a message to the specified queue.
`java.util.concurrent.Future<SendMessageResult>`	`sendMessageAsync(SendMessageRequest sendMessageRequest)` Delivers a message to the specified queue.
`java.util.concurrent.Future<SendMessageResult>`	`sendMessageAsync(SendMessageRequest sendMessageRequest, AsyncHandler<SendMessageRequest,SendMessageResult> asyncHandler)` Delivers a message to the specified queue.
`SendMessageBatchResult`	`sendMessageBatch(SendMessageBatchRequest sendMessageBatchRequest)` Delivers up to ten messages to the specified queue.
`SendMessageBatchResult`	`sendMessageBatch(java.lang.String queueUrl, java.util.List<SendMessageBatchRequestEntry> entries)` Delivers up to ten messages to the specified queue.
`java.util.concurrent.Future<SendMessageBatchResult>`	`sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest)` Delivers up to ten messages to the specified queue.
`java.util.concurrent.Future<SendMessageBatchResult>`	`sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest, AsyncHandler<SendMessageBatchRequest,SendMessageBatchResult> asyncHandler)` Delivers up to ten messages to the specified queue.
`void`	`setEndpoint(java.lang.String endpoint)` Overrides the default endpoint for this client ("https://sqs.us-east-1.amazonaws.com").
`void`	`setQueueAttributes(SetQueueAttributesRequest setQueueAttributesRequest)` Sets the value of one or more queue attributes.
`void`	`setQueueAttributes(java.lang.String queueUrl, java.util.Map<java.lang.String,java.lang.String> attributes)` Sets the value of one or more queue attributes.
`java.util.concurrent.Future<java.lang.Void>`	`setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest)` Sets the value of one or more queue attributes.
`java.util.concurrent.Future<java.lang.Void>`	`setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest, AsyncHandler<SetQueueAttributesRequest,java.lang.Void> asyncHandler)` Sets the value of one or more queue attributes.
`void`	`setRegion(Region region)` An alternative to `AmazonSQS.setEndpoint(String)`, sets the regional endpoint for this client's service calls.
`void`	`shutdown()` Shuts down this client object, releasing any resources that might be held open.

Methods inherited from class java.lang.Object
equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - USER_AGENT
```
public static final java.lang.String USER_AGENT
```
- Constructor Detail
  - AmazonSQSBufferedAsyncClient
```
public AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS)
```
  - AmazonSQSBufferedAsyncClient
```
public AmazonSQSBufferedAsyncClient(AmazonSQSAsync paramRealSQS,
                                    QueueBufferConfig config)
```
- Method Detail
  - setRegion
```
public void setRegion(Region region)
               throws java.lang.IllegalArgumentException
```
    Description copied from interface: AmazonSQS
    
    An alternative to AmazonSQS.setEndpoint(String), sets the regional endpoint for this client's service calls. Callers can use this method to control which AWS region they want to work with.
    By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the ClientConfiguration supplied at construction.
    This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
    
    Specified by:
    
    setRegion in interface AmazonSQS
    
    Parameters:
    
    region - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions) for accessing a given region.
    
    Throws:
    
    java.lang.IllegalArgumentException - If the given region is null, or if this service isn't available in the given region. See Region.isServiceSupported(String)
    
    See Also:
    
    Region.getRegion(com.amazonaws.regions.Regions), Region.createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
  - setQueueAttributes
```
public void setQueueAttributes(SetQueueAttributesRequest setQueueAttributesRequest)
                        throws AmazonServiceException,
                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
    
    In the future, new attributes might be added. When you write code that calls this action, we recommend structuring your code so that it can handle new attributes gracefully.
    
    Specified by:
    
    setQueueAttributes in interface AmazonSQS
    
    Parameters:
    
    setQueueAttributesRequest -
    
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibilityBatch
```
public ChangeMessageVisibilityBatchResult changeMessageVisibilityBatch(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    changeMessageVisibilityBatch in interface AmazonSQS
    
    Parameters:
    
    changeMessageVisibilityBatchRequest -
    
    Returns:
    
    changeMessageVisibilityBatchResult The response from the ChangeMessageVisibilityBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibility
```
public void changeMessageVisibility(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)
                             throws AmazonServiceException,
                                    AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. (For more information visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.)
    
    For example, let's say you have a message and its default message visibility timeout is 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message would be extended by 10 minutes beyond the time of the ChangeMessageVisibility call. This results in a total visibility timeout of 13 minutes. You can continue to call ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend beyond 12 hours, the request will be rejected.
    
    There is a 120,000 limit for the number of inflight messages per queue. Messages are inflight after they have been received from the queue by a consuming component, but have not yet been deleted from the queue. If you reach the 120,000 limit, you will receive an OverLimit error message from Amazon SQS. To help avoid reaching the limit, you should delete the messages from the queue after they have been processed. You can also increase the number of queues you use to process the messages.
    
    If you attempt to set the VisibilityTimeout to an amount more than the maximum time left, Amazon SQS returns an error. It will not automatically recalculate and increase the timeout to the maximum time remaining.
    
    Unlike with a queue, when you change the visibility timeout for a specific message, that timeout value is applied immediately but is not saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message the next time it is received reverts to the original timeout value, not the value you set with the ChangeMessageVisibility action.
    
    Specified by:
    
    changeMessageVisibility in interface AmazonSQS
    
    Throws:
    
    MessageNotInflightException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessageBatch
```
public SendMessageBatchResult sendMessageBatch(SendMessageBatchRequest sendMessageBatchRequest)
                                        throws AmazonServiceException,
                                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default for the queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    sendMessageBatch in interface AmazonSQS
    
    Parameters:
    
    sendMessageBatchRequest -
    
    Returns:
    
    sendMessageBatchResult The response from the SendMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    BatchRequestTooLongException
    
    InvalidBatchEntryIdException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessage
```
public SendMessageResult sendMessage(SendMessageRequest sendMessageRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Delivers a message to the specified queue.
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    Specified by:
    
    sendMessage in interface AmazonSQS
    
    Parameters:
    
    sendMessageRequest -
    
    Returns:
    
    sendMessageResult The response from the SendMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidMessageContentsException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - receiveMessage
```
public ReceiveMessageResult receiveMessage(ReceiveMessageRequest receiveMessageRequest)
                                    throws AmazonServiceException,
                                           AmazonClientException
```
    Description copied from interface: AmazonSQS
    Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
    
    For each message returned, the response includes the following:
    - Message body
    - MD5 digest of the message body. For information about MD5, see RFC1321.
    - Message ID you received when you sent the message to the queue.
    - Receipt handle.
    - Message attributes.
    - MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that is not deleted or a message whose visibility is not extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.
    
    Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessage in interface AmazonSQS
    
    Parameters:
    
    receiveMessageRequest -
    
    Returns:
    
    receiveMessageResult The response from the ReceiveMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessageBatch
```
public DeleteMessageBatchResult deleteMessageBatch(DeleteMessageBatchRequest deleteMessageBatchRequest)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    deleteMessageBatch in interface AmazonSQS
    
    Parameters:
    
    deleteMessageBatchRequest -
    
    Returns:
    
    deleteMessageBatchResult The response from the DeleteMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessage
```
public void deleteMessage(DeleteMessageRequest deleteMessageRequest)
                   throws AmazonServiceException,
                          AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
    
    The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. When you request DeleteMessage, if you don't provide the most recently received receipt handle for the message, the request will still succeed, but the message might not be deleted.
    
    It is possible you will receive a message even after you have deleted it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you request to delete the message. The copy remains on the server and might be returned to you again on a subsequent receive request. You should create your system to be idempotent so that receiving a particular message more than once is not a problem.
    
    Specified by:
    
    deleteMessage in interface AmazonSQS
    
    Parameters:
    
    deleteMessageRequest -
    
    Throws:
    
    InvalidIdFormatException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - shutdown
```
public void shutdown()
```
    Description copied from interface: AmazonSQS
    
    Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.
    
    Specified by:
    
    shutdown in interface AmazonSQS
  - changeMessageVisibilityBatchAsync
```
public java.util.concurrent.Future<ChangeMessageVisibilityBatchResult> changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest)
                                                                                                  throws AmazonServiceException,
                                                                                                         AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    changeMessageVisibilityBatchAsync in interface AmazonSQSAsync
    
    Parameters:
    
    changeMessageVisibilityBatchRequest -
    
    Returns:
    
    A Java Future object containing the response from the ChangeMessageVisibilityBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibilityAsync
```
public java.util.concurrent.Future<java.lang.Void> changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest)
                                                                         throws AmazonServiceException,
                                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. (For more information visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.)
    
    For example, let's say you have a message and its default message visibility timeout is 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message would be extended by 10 minutes beyond the time of the ChangeMessageVisibility call. This results in a total visibility timeout of 13 minutes. You can continue to call ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend beyond 12 hours, the request will be rejected.
    
    There is a 120,000 limit for the number of inflight messages per queue. Messages are inflight after they have been received from the queue by a consuming component, but have not yet been deleted from the queue. If you reach the 120,000 limit, you will receive an OverLimit error message from Amazon SQS. To help avoid reaching the limit, you should delete the messages from the queue after they have been processed. You can also increase the number of queues you use to process the messages.
    
    If you attempt to set the VisibilityTimeout to an amount more than the maximum time left, Amazon SQS returns an error. It will not automatically recalculate and increase the timeout to the maximum time remaining.
    
    Unlike with a queue, when you change the visibility timeout for a specific message, that timeout value is applied immediately but is not saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message the next time it is received reverts to the original timeout value, not the value you set with the ChangeMessageVisibility action.
    
    Specified by:
    
    changeMessageVisibilityAsync in interface AmazonSQSAsync
    
    Returns:
    
    A Java Future object containing the response from the ChangeMessageVisibility service method, as returned by Amazon SQS.
    
    Throws:
    
    MessageNotInflightException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessageBatchAsync
```
public java.util.concurrent.Future<SendMessageBatchResult> sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest)
                                                                          throws AmazonServiceException,
                                                                                 AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default for the queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    sendMessageBatchAsync in interface AmazonSQSAsync
    
    Parameters:
    
    sendMessageBatchRequest -
    
    Returns:
    
    A Java Future object containing the response from the SendMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    BatchRequestTooLongException
    
    InvalidBatchEntryIdException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessageAsync
```
public java.util.concurrent.Future<SendMessageResult> sendMessageAsync(SendMessageRequest sendMessageRequest)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Delivers a message to the specified queue.
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    Specified by:
    
    sendMessageAsync in interface AmazonSQSAsync
    
    Parameters:
    
    sendMessageRequest -
    
    Returns:
    
    A Java Future object containing the response from the SendMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidMessageContentsException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - receiveMessageAsync
```
public java.util.concurrent.Future<ReceiveMessageResult> receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest)
                                                                      throws AmazonServiceException,
                                                                             AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
    
    For each message returned, the response includes the following:
    - Message body
    - MD5 digest of the message body. For information about MD5, see RFC1321.
    - Message ID you received when you sent the message to the queue.
    - Receipt handle.
    - Message attributes.
    - MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that is not deleted or a message whose visibility is not extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.
    
    Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessageAsync in interface AmazonSQSAsync
    
    Parameters:
    
    receiveMessageRequest -
    
    Returns:
    
    A Java Future object containing the response from the ReceiveMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessageBatchAsync
```
public java.util.concurrent.Future<DeleteMessageBatchResult> deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest)
                                                                              throws AmazonServiceException,
                                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    deleteMessageBatchAsync in interface AmazonSQSAsync
    
    Parameters:
    
    deleteMessageBatchRequest -
    
    Returns:
    
    A Java Future object containing the response from the DeleteMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - setEndpoint
```
public void setEndpoint(java.lang.String endpoint)
                 throws java.lang.IllegalArgumentException
```
    Description copied from interface: AmazonSQS
    
    Overrides the default endpoint for this client ("https://sqs.us-east-1.amazonaws.com"). Callers can use this method to control which AWS region they want to work with.
    Callers can pass in just the endpoint (ex: "sqs.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "https://sqs.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol from this client's ClientConfiguration will be used, which by default is HTTPS.
    For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: http://developer.amazonwebservices.com/connect/entry.jspa?externalID= 3912
    This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.
    
    Specified by:
    
    setEndpoint in interface AmazonSQS
    
    Parameters:
    
    endpoint - The endpoint (ex: "sqs.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "https://sqs.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate with.
    
    Throws:
    
    java.lang.IllegalArgumentException - If any problems are detected with the specified endpoint.
  - setQueueAttributesAsync
```
public java.util.concurrent.Future<java.lang.Void> setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest)
                                                                    throws AmazonServiceException,
                                                                           AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
    
    In the future, new attributes might be added. When you write code that calls this action, we recommend structuring your code so that it can handle new attributes gracefully.
    
    Specified by:
    
    setQueueAttributesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    setQueueAttributesRequest -
    
    Returns:
    
    A Java Future object containing the response from the SetQueueAttributes service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueUrlAsync
```
public java.util.concurrent.Future<GetQueueUrlResult> getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrlAsync in interface AmazonSQSAsync
    
    Parameters:
    
    getQueueUrlRequest -
    
    Returns:
    
    A Java Future object containing the response from the GetQueueUrl service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - removePermissionAsync
```
public java.util.concurrent.Future<java.lang.Void> removePermissionAsync(RemovePermissionRequest removePermissionRequest)
                                                                  throws AmazonServiceException,
                                                                         AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
    
    Specified by:
    
    removePermissionAsync in interface AmazonSQSAsync
    
    Parameters:
    
    removePermissionRequest -
    
    Returns:
    
    A Java Future object containing the response from the RemovePermission service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueUrl
```
public GetQueueUrlResult getQueueUrl(GetQueueUrlRequest getQueueUrlRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrl in interface AmazonSQS
    
    Parameters:
    
    getQueueUrlRequest -
    
    Returns:
    
    getQueueUrlResult The response from the GetQueueUrl service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - removePermission
```
public void removePermission(RemovePermissionRequest removePermissionRequest)
                      throws AmazonServiceException,
                             AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
    
    Specified by:
    
    removePermission in interface AmazonSQS
    
    Parameters:
    
    removePermissionRequest -
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueAttributesAsync
```
public java.util.concurrent.Future<GetQueueAttributesResult> getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest)
                                                                              throws AmazonServiceException,
                                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Gets attributes for the specified queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    getQueueAttributesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    getQueueAttributesRequest -
    
    Returns:
    
    A Java Future object containing the response from the GetQueueAttributes service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueAttributes
```
public GetQueueAttributesResult getQueueAttributes(GetQueueAttributesRequest getQueueAttributesRequest)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Gets attributes for the specified queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    getQueueAttributes in interface AmazonSQS
    
    Parameters:
    
    getQueueAttributesRequest -
    
    Returns:
    
    getQueueAttributesResult The response from the GetQueueAttributes service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - purgeQueueAsync
```
public java.util.concurrent.Future<java.lang.Void> purgeQueueAsync(PurgeQueueRequest purgeQueueRequest)
                                                            throws AmazonServiceException,
                                                                   AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the messages in a queue specified by the queue URL.
    
    When you use the PurgeQueue API, the deleted messages in the queue can't be retrieved.
    
    When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling PurgeQueue will be deleted; messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue was called might be received, but will be deleted within the next minute.
    
    Specified by:
    
    purgeQueueAsync in interface AmazonSQSAsync
    
    Parameters:
    
    purgeQueueRequest -
    
    Returns:
    
    A Java Future object containing the response from the PurgeQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    PurgeQueueInProgressException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - purgeQueue
```
public void purgeQueue(PurgeQueueRequest purgeQueueRequest)
                throws AmazonServiceException,
                       AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the messages in a queue specified by the queue URL.
    
    When you use the PurgeQueue API, the deleted messages in the queue can't be retrieved.
    
    When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling PurgeQueue will be deleted; messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue was called might be received, but will be deleted within the next minute.
    
    Specified by:
    
    purgeQueue in interface AmazonSQS
    
    Parameters:
    
    purgeQueueRequest -
    
    Throws:
    
    QueueDoesNotExistException
    
    PurgeQueueInProgressException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteQueueAsync
```
public java.util.concurrent.Future<java.lang.Void> deleteQueueAsync(DeleteQueueRequest deleteQueueRequest)
                                                             throws AmazonServiceException,
                                                                    AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the queue specified by the queue URL, regardless of whether the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.
    
    Use DeleteQueue with care; once you delete your queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide.
    
    Specified by:
    
    deleteQueueAsync in interface AmazonSQSAsync
    
    Parameters:
    
    deleteQueueRequest -
    
    Returns:
    
    A Java Future object containing the response from the DeleteQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteQueue
```
public void deleteQueue(DeleteQueueRequest deleteQueueRequest)
                 throws AmazonServiceException,
                        AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the queue specified by the queue URL, regardless of whether the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.
    
    Use DeleteQueue with care; once you delete your queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide.
    
    Specified by:
    
    deleteQueue in interface AmazonSQS
    
    Parameters:
    
    deleteQueueRequest -
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listQueuesAsync
```
public java.util.concurrent.Future<ListQueuesResult> listQueuesAsync(ListQueuesRequest listQueuesRequest)
                                                              throws AmazonServiceException,
                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    listQueuesRequest -
    
    Returns:
    
    A Java Future object containing the response from the ListQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listQueues
```
public ListQueuesResult listQueues(ListQueuesRequest listQueuesRequest)
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
    
    Specified by:
    
    listQueues in interface AmazonSQS
    
    Parameters:
    
    listQueuesRequest -
    
    Returns:
    
    listQueuesResult The response from the ListQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - createQueueAsync
```
public java.util.concurrent.Future<CreateQueueResult> createQueueAsync(CreateQueueRequest createQueueRequest)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request.
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter.
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Some API actions take lists of parameters. Specify these lists using the param.n notation. Values of n are integers starting from 1. The following is an example of a parameter list with two elements:
    
    &Attribute.1=this
    
    &Attribute.2=that
    Specified by:
    
    createQueueAsync in interface AmazonSQSAsync
    
    Parameters:
    
    createQueueRequest -
    
    Returns:
    
    A Java Future object containing the response from the CreateQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDeletedRecentlyException
    
    QueueNameExistsException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - createQueue
```
public CreateQueueResult createQueue(CreateQueueRequest createQueueRequest)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request.
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter.
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Some API actions take lists of parameters. Specify these lists using the param.n notation. Values of n are integers starting from 1. The following is an example of a parameter list with two elements:
    
    &Attribute.1=this
    
    &Attribute.2=that
    Specified by:
    
    createQueue in interface AmazonSQS
    
    Parameters:
    
    createQueueRequest -
    
    Returns:
    
    createQueueResult The response from the CreateQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDeletedRecentlyException
    
    QueueNameExistsException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - addPermissionAsync
```
public java.util.concurrent.Future<java.lang.Void> addPermissionAsync(AddPermissionRequest addPermissionRequest)
                                                               throws AmazonServiceException,
                                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Adds a permission to a queue for a specific principal. This allows for sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.
    
    AddPermission writes an Amazon SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon SQS Developer Guide.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    addPermissionAsync in interface AmazonSQSAsync
    
    Parameters:
    
    addPermissionRequest -
    
    Returns:
    
    A Java Future object containing the response from the AddPermission service method, as returned by Amazon SQS.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - addPermission
```
public void addPermission(AddPermissionRequest addPermissionRequest)
                   throws AmazonServiceException,
                          AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Adds a permission to a queue for a specific principal. This allows for sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.
    
    AddPermission writes an Amazon SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon SQS Developer Guide.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    addPermission in interface AmazonSQS
    
    Parameters:
    
    addPermissionRequest -
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listQueues
```
public ListQueuesResult listQueues()
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
    
    Specified by:
    
    listQueues in interface AmazonSQS
    
    Returns:
    
    listQueuesResult The response from the ListQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getCachedResponseMetadata
```
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)
```
    Description copied from interface: AmazonSQS
    
    Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.
    Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.
    
    Specified by:
    
    getCachedResponseMetadata in interface AmazonSQS
    
    Parameters:
    
    request - The originally executed request.
    
    Returns:
    
    The response metadata for the specified request, or null if none is available.
  - deleteMessageAsync
```
public java.util.concurrent.Future<java.lang.Void> deleteMessageAsync(DeleteMessageRequest deleteMessageRequest)
                                                               throws AmazonServiceException,
                                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
    
    The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. When you request DeleteMessage, if you don't provide the most recently received receipt handle for the message, the request will still succeed, but the message might not be deleted.
    
    It is possible you will receive a message even after you have deleted it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you request to delete the message. The copy remains on the server and might be returned to you again on a subsequent receive request. You should create your system to be idempotent so that receiving a particular message more than once is not a problem.
    
    Specified by:
    
    deleteMessageAsync in interface AmazonSQSAsync
    
    Parameters:
    
    deleteMessageRequest -
    
    Returns:
    
    A Java Future object containing the response from the DeleteMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidIdFormatException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibilityAsync
```
public java.util.concurrent.Future<java.lang.Void> changeMessageVisibilityAsync(ChangeMessageVisibilityRequest changeMessageVisibilityRequest,
                                                                                AsyncHandler<ChangeMessageVisibilityRequest,java.lang.Void> asyncHandler)
                                                                         throws AmazonServiceException,
                                                                                AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. (For more information visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.)
    
    For example, let's say you have a message and its default message visibility timeout is 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message would be extended by 10 minutes beyond the time of the ChangeMessageVisibility call. This results in a total visibility timeout of 13 minutes. You can continue to call ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend beyond 12 hours, the request will be rejected.
    
    There is a 120,000 limit for the number of inflight messages per queue. Messages are inflight after they have been received from the queue by a consuming component, but have not yet been deleted from the queue. If you reach the 120,000 limit, you will receive an OverLimit error message from Amazon SQS. To help avoid reaching the limit, you should delete the messages from the queue after they have been processed. You can also increase the number of queues you use to process the messages.
    
    If you attempt to set the VisibilityTimeout to an amount more than the maximum time left, Amazon SQS returns an error. It will not automatically recalculate and increase the timeout to the maximum time remaining.
    
    Unlike with a queue, when you change the visibility timeout for a specific message, that timeout value is applied immediately but is not saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message the next time it is received reverts to the original timeout value, not the value you set with the ChangeMessageVisibility action.
    
    Specified by:
    
    changeMessageVisibilityAsync in interface AmazonSQSAsync
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the ChangeMessageVisibility service method, as returned by Amazon SQS.
    
    Throws:
    
    MessageNotInflightException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessageAsync
```
public java.util.concurrent.Future<SendMessageResult> sendMessageAsync(SendMessageRequest sendMessageRequest,
                                                                       AsyncHandler<SendMessageRequest,SendMessageResult> asyncHandler)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Delivers a message to the specified queue.
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    Specified by:
    
    sendMessageAsync in interface AmazonSQSAsync
    
    Parameters:
    
    sendMessageRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the SendMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidMessageContentsException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - receiveMessageAsync
```
public java.util.concurrent.Future<ReceiveMessageResult> receiveMessageAsync(ReceiveMessageRequest receiveMessageRequest,
                                                                             AsyncHandler<ReceiveMessageRequest,ReceiveMessageResult> asyncHandler)
                                                                      throws AmazonServiceException,
                                                                             AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
    
    For each message returned, the response includes the following:
    - Message body
    - MD5 digest of the message body. For information about MD5, see RFC1321.
    - Message ID you received when you sent the message to the queue.
    - Receipt handle.
    - Message attributes.
    - MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that is not deleted or a message whose visibility is not extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.
    
    Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessageAsync in interface AmazonSQSAsync
    
    Parameters:
    
    receiveMessageRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the ReceiveMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessageAsync
```
public java.util.concurrent.Future<java.lang.Void> deleteMessageAsync(DeleteMessageRequest deleteMessageRequest,
                                                                      AsyncHandler<DeleteMessageRequest,java.lang.Void> asyncHandler)
                                                               throws AmazonServiceException,
                                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
    
    The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. When you request DeleteMessage, if you don't provide the most recently received receipt handle for the message, the request will still succeed, but the message might not be deleted.
    
    It is possible you will receive a message even after you have deleted it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you request to delete the message. The copy remains on the server and might be returned to you again on a subsequent receive request. You should create your system to be idempotent so that receiving a particular message more than once is not a problem.
    
    Specified by:
    
    deleteMessageAsync in interface AmazonSQSAsync
    
    Parameters:
    
    deleteMessageRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the DeleteMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidIdFormatException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - setQueueAttributesAsync
```
public java.util.concurrent.Future<java.lang.Void> setQueueAttributesAsync(SetQueueAttributesRequest setQueueAttributesRequest,
                                                                           AsyncHandler<SetQueueAttributesRequest,java.lang.Void> asyncHandler)
                                                                    throws AmazonServiceException,
                                                                           AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
    
    In the future, new attributes might be added. When you write code that calls this action, we recommend structuring your code so that it can handle new attributes gracefully.
    
    Specified by:
    
    setQueueAttributesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    setQueueAttributesRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the SetQueueAttributes service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibilityBatchAsync
```
public java.util.concurrent.Future<ChangeMessageVisibilityBatchResult> changeMessageVisibilityBatchAsync(ChangeMessageVisibilityBatchRequest changeMessageVisibilityBatchRequest,
                                                                                                         AsyncHandler<ChangeMessageVisibilityBatchRequest,ChangeMessageVisibilityBatchResult> asyncHandler)
                                                                                                  throws AmazonServiceException,
                                                                                                         AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    changeMessageVisibilityBatchAsync in interface AmazonSQSAsync
    
    Parameters:
    
    changeMessageVisibilityBatchRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the ChangeMessageVisibilityBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueUrlAsync
```
public java.util.concurrent.Future<GetQueueUrlResult> getQueueUrlAsync(GetQueueUrlRequest getQueueUrlRequest,
                                                                       AsyncHandler<GetQueueUrlRequest,GetQueueUrlResult> asyncHandler)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrlAsync in interface AmazonSQSAsync
    
    Parameters:
    
    getQueueUrlRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the GetQueueUrl service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - removePermissionAsync
```
public java.util.concurrent.Future<java.lang.Void> removePermissionAsync(RemovePermissionRequest removePermissionRequest,
                                                                         AsyncHandler<RemovePermissionRequest,java.lang.Void> asyncHandler)
                                                                  throws AmazonServiceException,
                                                                         AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
    
    Specified by:
    
    removePermissionAsync in interface AmazonSQSAsync
    
    Parameters:
    
    removePermissionRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the RemovePermission service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueAttributesAsync
```
public java.util.concurrent.Future<GetQueueAttributesResult> getQueueAttributesAsync(GetQueueAttributesRequest getQueueAttributesRequest,
                                                                                     AsyncHandler<GetQueueAttributesRequest,GetQueueAttributesResult> asyncHandler)
                                                                              throws AmazonServiceException,
                                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Gets attributes for the specified queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    getQueueAttributesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    getQueueAttributesRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the GetQueueAttributes service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessageBatchAsync
```
public java.util.concurrent.Future<SendMessageBatchResult> sendMessageBatchAsync(SendMessageBatchRequest sendMessageBatchRequest,
                                                                                 AsyncHandler<SendMessageBatchRequest,SendMessageBatchResult> asyncHandler)
                                                                          throws AmazonServiceException,
                                                                                 AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default for the queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    sendMessageBatchAsync in interface AmazonSQSAsync
    
    Parameters:
    
    sendMessageBatchRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the SendMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    BatchRequestTooLongException
    
    InvalidBatchEntryIdException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - purgeQueueAsync
```
public java.util.concurrent.Future<java.lang.Void> purgeQueueAsync(PurgeQueueRequest purgeQueueRequest,
                                                                   AsyncHandler<PurgeQueueRequest,java.lang.Void> asyncHandler)
                                                            throws AmazonServiceException,
                                                                   AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the messages in a queue specified by the queue URL.
    
    When you use the PurgeQueue API, the deleted messages in the queue can't be retrieved.
    
    When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling PurgeQueue will be deleted; messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue was called might be received, but will be deleted within the next minute.
    
    Specified by:
    
    purgeQueueAsync in interface AmazonSQSAsync
    
    Parameters:
    
    purgeQueueRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the PurgeQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    PurgeQueueInProgressException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteQueueAsync
```
public java.util.concurrent.Future<java.lang.Void> deleteQueueAsync(DeleteQueueRequest deleteQueueRequest,
                                                                    AsyncHandler<DeleteQueueRequest,java.lang.Void> asyncHandler)
                                                             throws AmazonServiceException,
                                                                    AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes the queue specified by the queue URL, regardless of whether the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.
    
    Use DeleteQueue with care; once you delete your queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide.
    
    Specified by:
    
    deleteQueueAsync in interface AmazonSQSAsync
    
    Parameters:
    
    deleteQueueRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the DeleteQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listQueuesAsync
```
public java.util.concurrent.Future<ListQueuesResult> listQueuesAsync(ListQueuesRequest listQueuesRequest,
                                                                     AsyncHandler<ListQueuesRequest,ListQueuesResult> asyncHandler)
                                                              throws AmazonServiceException,
                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
    
    Specified by:
    
    listQueuesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    listQueuesRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the ListQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessageBatchAsync
```
public java.util.concurrent.Future<DeleteMessageBatchResult> deleteMessageBatchAsync(DeleteMessageBatchRequest deleteMessageBatchRequest,
                                                                                     AsyncHandler<DeleteMessageBatchRequest,DeleteMessageBatchResult> asyncHandler)
                                                                              throws AmazonServiceException,
                                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    deleteMessageBatchAsync in interface AmazonSQSAsync
    
    Parameters:
    
    deleteMessageBatchRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the DeleteMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - createQueueAsync
```
public java.util.concurrent.Future<CreateQueueResult> createQueueAsync(CreateQueueRequest createQueueRequest,
                                                                       AsyncHandler<CreateQueueRequest,CreateQueueResult> asyncHandler)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request.
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter.
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Some API actions take lists of parameters. Specify these lists using the param.n notation. Values of n are integers starting from 1. The following is an example of a parameter list with two elements:
    
    &Attribute.1=this
    
    &Attribute.2=that
    Specified by:
    
    createQueueAsync in interface AmazonSQSAsync
    
    Parameters:
    
    createQueueRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the CreateQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDeletedRecentlyException
    
    QueueNameExistsException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - addPermissionAsync
```
public java.util.concurrent.Future<java.lang.Void> addPermissionAsync(AddPermissionRequest addPermissionRequest,
                                                                      AsyncHandler<AddPermissionRequest,java.lang.Void> asyncHandler)
                                                               throws AmazonServiceException,
                                                                      AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Adds a permission to a queue for a specific principal. This allows for sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.
    
    AddPermission writes an Amazon SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon SQS Developer Guide.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    addPermissionAsync in interface AmazonSQSAsync
    
    Parameters:
    
    addPermissionRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the AddPermission service method, as returned by Amazon SQS.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listDeadLetterSourceQueues
```
public ListDeadLetterSourceQueuesResult listDeadLetterSourceQueues(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)
                                                            throws AmazonServiceException,
                                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
    
    For more information about using dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listDeadLetterSourceQueues in interface AmazonSQS
    
    Parameters:
    
    listDeadLetterSourceQueuesRequest -
    
    Returns:
    
    listDeadLetterSourceQueuesResult The response from the ListDeadLetterSourceQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listDeadLetterSourceQueuesAsync
```
public java.util.concurrent.Future<ListDeadLetterSourceQueuesResult> listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest)
                                                                                              throws AmazonServiceException,
                                                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
    
    For more information about using dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listDeadLetterSourceQueuesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    listDeadLetterSourceQueuesRequest -
    
    Returns:
    
    A Java Future object containing the response from the ListDeadLetterSourceQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listDeadLetterSourceQueuesAsync
```
public java.util.concurrent.Future<ListDeadLetterSourceQueuesResult> listDeadLetterSourceQueuesAsync(ListDeadLetterSourceQueuesRequest listDeadLetterSourceQueuesRequest,
                                                                                                     AsyncHandler<ListDeadLetterSourceQueuesRequest,ListDeadLetterSourceQueuesResult> asyncHandler)
                                                                                              throws AmazonServiceException,
                                                                                                     AmazonClientException
```
    Description copied from interface: AmazonSQSAsync
    
    Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
    
    For more information about using dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    listDeadLetterSourceQueuesAsync in interface AmazonSQSAsync
    
    Parameters:
    
    listDeadLetterSourceQueuesRequest -
    
    asyncHandler - Asynchronous callback handler for events in the life-cycle of the request. Users could provide the implementation of the four callback methods in this interface to process the operation result or handle the exception.
    
    Returns:
    
    A Java Future object containing the response from the ListDeadLetterSourceQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - setQueueAttributes
```
public void setQueueAttributes(java.lang.String queueUrl,
                               java.util.Map<java.lang.String,java.lang.String> attributes)
                        throws AmazonServiceException,
                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
    
    In the future, new attributes might be added. When you write code that calls this action, we recommend structuring your code so that it can handle new attributes gracefully.
    Specified by:
    
    setQueueAttributes in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    attributes -
    A map of attributes to set.
    
    The following lists the names, descriptions, and values of the special request parameters that the SetQueueAttributes action uses:
    
    DelaySeconds - The number of seconds for which the delivery of all messages in the queue is delayed. An integer from 0 to 900 (15 minutes). The default is 0 (zero).
    
    MaximumMessageSize - The limit of how many bytes a message can contain before Amazon SQS rejects it. An integer from 1,024 bytes (1 KiB) up to 262,144 bytes (256 KiB). The default is 262,144 (256 KiB).
    
    MessageRetentionPeriod - The number of seconds for which Amazon SQS retains a message. An integer representing seconds, from 60 (1 minute) to 120,9600 (14 days). The default is 345,600 (4 days).
    
    Policy - The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.
    
    ReceiveMessageWaitTimeSeconds - The number of seconds for which a ReceiveMessage action will wait for a message to arrive. An integer from 0 to 20 (seconds). The default is 0.
    
    RedrivePolicy - The parameters for the dead letter queue functionality of the source queue. For more information about the redrive policy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
    
    The dead letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead letter queue of a standard queue must also be a standard queue.
    
    VisibilityTimeout - The visibility timeout for the queue. An integer from 0 to 43200 (12 hours). The default is 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    The following attribute applies only to FIFO (first-in-first-out) queues:
    
    ContentBasedDeduplication - Enables content-based deduplication. For more information, see Exactly-Once Processing in the Amazon SQS Developer Guide.
    
    Every message must have a unique MessageDeduplicationId,
    
    You may provide a MessageDeduplicationId explicitly.
    
    If you aren't able to provide a MessageDeduplicationId and you enable ContentBasedDeduplication for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId using the body of the message (but not the attributes of the message).
    
    If you don't provide a MessageDeduplicationId and the queue doesn't have ContentBasedDeduplication set, the action fails with an error.
    
    If the queue has ContentBasedDeduplication set, your MessageDeduplicationId overrides the generated one.
    
    When ContentBasedDeduplication is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
    
    You can also use ContentBasedDeduplication for messages with identical content to be treated as duplicates.
    
    If you send one message with ContentBasedDeduplication enabled and then another message with a MessageDeduplicationId that is the same as the one generated for the first MessageDeduplicationId, the two messages are treated as duplicates and only one copy of the message is delivered.
    
    Any other valid special request parameters that are specified (such as ApproximateNumberOfMessages, ApproximateNumberOfMessagesDelayed, ApproximateNumberOfMessagesNotVisible, CreatedTimestamp, LastModifiedTimestamp, and QueueArn) will be ignored.
    Throws:
    
    InvalidAttributeNameException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibilityBatch
```
public ChangeMessageVisibilityBatchResult changeMessageVisibilityBatch(java.lang.String queueUrl,
                                                                       java.util.List<ChangeMessageVisibilityBatchRequestEntry> entries)
                                                                throws AmazonServiceException,
                                                                       AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    changeMessageVisibilityBatch in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    entries -
    A list of receipt handles of the messages for which the visibility timeout must be changed.
    
    Returns:
    
    changeMessageVisibilityBatchResult The response from the ChangeMessageVisibilityBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - changeMessageVisibility
```
public void changeMessageVisibility(java.lang.String queueUrl,
                                    java.lang.String receiptHandle,
                                    java.lang.Integer visibilityTimeout)
                             throws AmazonServiceException,
                                    AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. (For more information visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.)
    
    For example, let's say you have a message and its default message visibility timeout is 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message would be extended by 10 minutes beyond the time of the ChangeMessageVisibility call. This results in a total visibility timeout of 13 minutes. You can continue to call ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend beyond 12 hours, the request will be rejected.
    
    There is a 120,000 limit for the number of inflight messages per queue. Messages are inflight after they have been received from the queue by a consuming component, but have not yet been deleted from the queue. If you reach the 120,000 limit, you will receive an OverLimit error message from Amazon SQS. To help avoid reaching the limit, you should delete the messages from the queue after they have been processed. You can also increase the number of queues you use to process the messages.
    
    If you attempt to set the VisibilityTimeout to an amount more than the maximum time left, Amazon SQS returns an error. It will not automatically recalculate and increase the timeout to the maximum time remaining.
    
    Unlike with a queue, when you change the visibility timeout for a specific message, that timeout value is applied immediately but is not saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message the next time it is received reverts to the original timeout value, not the value you set with the ChangeMessageVisibility action.
    
    Specified by:
    
    changeMessageVisibility in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    receiptHandle -
    The receipt handle associated with the message whose visibility timeout should be changed. This parameter is returned by the ReceiveMessage action.
    
    visibilityTimeout -
    The new value (in seconds - from 0 to 43200 - maximum 12 hours) for the message's visibility timeout.
    
    Throws:
    
    MessageNotInflightException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueUrl
```
public GetQueueUrlResult getQueueUrl(java.lang.String queueName)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
    
    To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.
    
    Specified by:
    
    getQueueUrl in interface AmazonSQS
    
    Parameters:
    
    queueName -
    The name of the queue whose URL must be fetched. Maximum 80 characters; alphanumeric characters, hyphens (-), and underscores (_) are allowed.
    
    Queue names are case-sensitive.
    
    Returns:
    
    getQueueUrlResult The response from the GetQueueUrl service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDoesNotExistException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - removePermission
```
public void removePermission(java.lang.String queueUrl,
                             java.lang.String label)
                      throws AmazonServiceException,
                             AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
    
    Specified by:
    
    removePermission in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    label -
    The identification of the permission to remove. This is the label added with the AddPermission action.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessageBatch
```
public SendMessageBatchResult sendMessageBatch(java.lang.String queueUrl,
                                               java.util.List<SendMessageBatchRequestEntry> entries)
                                        throws AmazonServiceException,
                                               AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
    
    The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default for the queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    sendMessageBatch in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    entries -
    A list of SendMessageBatchRequestEntry items.
    
    Returns:
    
    sendMessageBatchResult The response from the SendMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    BatchRequestTooLongException
    
    InvalidBatchEntryIdException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteQueue
```
public void deleteQueue(java.lang.String queueUrl)
                 throws AmazonServiceException,
                        AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the queue specified by the queue URL, regardless of whether the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.
    
    Use DeleteQueue with care; once you delete your queue, any messages in the queue are no longer available.
    
    When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    
    We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide.
    
    Specified by:
    
    deleteQueue in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - sendMessage
```
public SendMessageResult sendMessage(java.lang.String queueUrl,
                                     java.lang.String messageBody)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Delivers a message to the specified queue.
    
    The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:
    
    #x9 | #xA | #xD | [ #x20 to #xD7FF] | [#xE000 to #xFFFD] | [#x10000 to #x10FFFF]
    
    For more information, see RFC1321. If you send any characters that aren't included in this list, your request will be rejected.
    
    Specified by:
    
    sendMessage in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    messageBody -
    The message to send. String maximum 256 KB in size. For a list of allowed characters, see the preceding note.
    
    Returns:
    
    sendMessageResult The response from the SendMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    InvalidMessageContentsException
    
    UnsupportedOperationException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - receiveMessage
```
public ReceiveMessageResult receiveMessage(java.lang.String queueUrl)
                                    throws AmazonServiceException,
                                           AmazonClientException
```
    Description copied from interface: AmazonSQS
    Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide.
    
    Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
    
    For each message returned, the response includes the following:
    - Message body
    - MD5 digest of the message body. For information about MD5, see RFC1321.
    - Message ID you received when you sent the message to the queue.
    - Receipt handle.
    - Message attributes.
    - MD5 digest of the message attributes.
    The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
    
    You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    A message that is not deleted or a message whose visibility is not extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.
    
    Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    Specified by:
    
    receiveMessage in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    Returns:
    
    receiveMessageResult The response from the ReceiveMessage service method, as returned by Amazon SQS.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - listQueues
```
public ListQueuesResult listQueues(java.lang.String queueNamePrefix)
                            throws AmazonServiceException,
                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
    
    Specified by:
    
    listQueues in interface AmazonSQS
    
    Parameters:
    
    queueNamePrefix -
    A string to use for filtering the list results. Only those queues whose name begins with the specified string are returned.
    
    Queue names are case-sensitive.
    
    Returns:
    
    listQueuesResult The response from the ListQueues service method, as returned by Amazon SQS.
    
    Throws:
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessageBatch
```
public DeleteMessageBatchResult deleteMessageBatch(java.lang.String queueUrl,
                                                   java.util.List<DeleteMessageBatchRequestEntry> entries)
                                            throws AmazonServiceException,
                                                   AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response.
    
    Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    deleteMessageBatch in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    entries -
    A list of receipt handles for the messages to be deleted.
    
    Returns:
    
    deleteMessageBatchResult The response from the DeleteMessageBatch service method, as returned by Amazon SQS.
    
    Throws:
    
    TooManyEntriesInBatchRequestException
    
    EmptyBatchRequestException
    
    BatchEntryIdsNotDistinctException
    
    InvalidBatchEntryIdException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - createQueue
```
public CreateQueueResult createQueue(java.lang.String queueName)
                              throws AmazonServiceException,
                                     AmazonClientException
```
    Description copied from interface: AmazonSQS
    Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request.
    - If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.
      
      You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.
    - If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
    - If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
    To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
    
    To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter.
    - If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.
    - If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.
    Some API actions take lists of parameters. Specify these lists using the param.n notation. Values of n are integers starting from 1. The following is an example of a parameter list with two elements:
    
    &Attribute.1=this
    
    &Attribute.2=that
    Specified by:
    
    createQueue in interface AmazonSQS
    
    Parameters:
    queueName -
    The name of the new queue. The following limits apply to this name:
    
    A queue name can have up to 80 characters.
    
    The following are accepted: alphanumeric chatacters, hyphens ( -), and underscores (_).
    
    A FIFO queue name must end with the .fifo suffix.
    
    Queue names are case-sensitive.
    Returns:
    
    createQueueResult The response from the CreateQueue service method, as returned by Amazon SQS.
    
    Throws:
    
    QueueDeletedRecentlyException
    
    QueueNameExistsException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - addPermission
```
public void addPermission(java.lang.String queueUrl,
                          java.lang.String label,
                          java.util.List<java.lang.String> aWSAccountIds,
                          java.util.List<java.lang.String> actions)
                   throws AmazonServiceException,
                          AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Adds a permission to a queue for a specific principal. This allows for sharing access to the queue.
    
    When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.
    
    AddPermission writes an Amazon SQS-generated policy. If you want to write your own policy, use SetQueueAttributes to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon SQS Developer Guide.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    
    Specified by:
    
    addPermission in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    label -
    The unique identification of the permission you're setting (e.g., AliceSendMessage). Constraints: Maximum 80 characters; alphanumeric characters, hyphens (-), and underscores (_) are allowed.
    
    aWSAccountIds -
    The AWS account number of the principal who will be given permission. The principal must have an AWS account, but does not need to be signed up for Amazon SQS. For information about locating the AWS account identification, see Your AWS Identifiers in the Amazon SQS Developer Guide.
    
    actions -
    The action the client wants to allow for the specified principal. The following are valid values: * | SendMessage | ReceiveMessage | DeleteMessage | ChangeMessageVisibility | GetQueueAttributes | GetQueueUrl . For more information about these actions, see Understanding Permissions in the Amazon SQS Developer Guide.
    
    Specifying SendMessage, DeleteMessage, or ChangeMessageVisibility for the ActionName.n also grants permissions for the corresponding batch versions of those actions: SendMessageBatch, DeleteMessageBatch , and ChangeMessageVisibilityBatch.
    
    Throws:
    
    OverLimitException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - deleteMessage
```
public void deleteMessage(java.lang.String queueUrl,
                          java.lang.String receiptHandle)
                   throws AmazonServiceException,
                          AmazonClientException
```
    Description copied from interface: AmazonSQS
    
    Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
    
    The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. When you request DeleteMessage, if you don't provide the most recently received receipt handle for the message, the request will still succeed, but the message might not be deleted.
    
    It is possible you will receive a message even after you have deleted it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you request to delete the message. The copy remains on the server and might be returned to you again on a subsequent receive request. You should create your system to be idempotent so that receiving a particular message more than once is not a problem.
    
    Specified by:
    
    deleteMessage in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    
    receiptHandle -
    The receipt handle associated with the message to delete.
    
    Throws:
    
    InvalidIdFormatException
    
    ReceiptHandleIsInvalidException
    
    AmazonServiceException - If an error response is returned by Amazon SQS indicating either a problem with the data in the request, or a server side issue.
    
    AmazonClientException - If any internal errors are encountered inside the client while attempting to make the request or handle the response. For example if a network connection is not available.
  - getQueueAttributes
```
public GetQueueAttributesResult getQueueAttributes(java.lang.String queueUrl,
                                                   java.util.List<java.lang.String> attributeNames)
```
    Description copied from interface: AmazonSQS
    
    Gets attributes for the specified queue.
    
    Some API actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:
    
    &Attribute.1=this
    
    &Attribute.2=that
    Specified by:
    
    getQueueAttributes in interface AmazonSQS
    
    Parameters:
    
    queueUrl -
    The URL of the Amazon SQS queue to take action on.
    
    Queue URLs are case-sensitive.
    attributeNames -
    A list of attributes for which to retrieve information.
    
    Going forward, new attributes might be added. If you are writing code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
    
    The following attributes are supported:
    
    All - Returns all values.
    
    ApproximateNumberOfMessages - Returns the approximate number of visible messages in a queue. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide.
    
    ApproximateNumberOfMessagesDelayed - Returns the approximate number of messages that are waiting to be added to the queue.
    
    ApproximateNumberOfMessagesNotVisible - Returns the approximate number of messages that have not timed-out and are not deleted. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide.
    
    CreatedTimestamp - Returns the time when the queue was created in seconds (epoch time).
    
    DelaySeconds - Returns the default delay on the queue in seconds.
    
    LastModifiedTimestamp - Returns the time when the queue was last changed in seconds (epoch time).
    
    MaximumMessageSize - Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.
    
    MessageRetentionPeriod - Returns the number of seconds for which Amazon SQS retains a message.
    
    Policy - Returns the policy of the queue.
    
    QueueArn - Returns the Amazon resource name (ARN) of the queue.
    
    ReceiveMessageWaitTimeSeconds - Returns the number of seconds for which ReceiveMessage call will wait for a message to arrive.
    
    RedrivePolicy - Returns the parameters for dead letter queue functionality of the source queue. For more information about the redrive policy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
    
    VisibilityTimeout - Returns the visibility timeout for the queue. For more information about the visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
    
    The following attributes apply only to FIFO (first-in-first-out) queues:
    
    FifoQueue - Returns whether the queue is FIFO. For more information, see FIFO Queue Logic in the Amazon SQS Developer Guide.
    
    ContentBasedDeduplication - Returns whether content-based deduplication is enabled for the queue. For more information, see Exactly-Once Processing in the Amazon SQS Developer Guide.
    Returns:
    
    getQueueAttributesResult The response from the GetQueueAttributes service method, as returned by Amazon SQS.

Class AmazonSQSBufferedAsyncClient

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

USER_AGENT

Constructor Detail

AmazonSQSBufferedAsyncClient

AmazonSQSBufferedAsyncClient

Method Detail

setRegion

setQueueAttributes

changeMessageVisibilityBatch

changeMessageVisibility

sendMessageBatch

sendMessage

receiveMessage

deleteMessageBatch

deleteMessage

shutdown

changeMessageVisibilityBatchAsync

changeMessageVisibilityAsync

sendMessageBatchAsync

sendMessageAsync

receiveMessageAsync

deleteMessageBatchAsync

setEndpoint

setQueueAttributesAsync

getQueueUrlAsync

removePermissionAsync

getQueueUrl

removePermission

getQueueAttributesAsync

getQueueAttributes

purgeQueueAsync

purgeQueue

deleteQueueAsync

deleteQueue

listQueuesAsync

listQueues

createQueueAsync

createQueue

addPermissionAsync

addPermission

listQueues

getCachedResponseMetadata

deleteMessageAsync

changeMessageVisibilityAsync

sendMessageAsync

receiveMessageAsync

deleteMessageAsync

setQueueAttributesAsync

changeMessageVisibilityBatchAsync

getQueueUrlAsync

removePermissionAsync

getQueueAttributesAsync

sendMessageBatchAsync

purgeQueueAsync

deleteQueueAsync

listQueuesAsync

deleteMessageBatchAsync

createQueueAsync

addPermissionAsync

listDeadLetterSourceQueues

listDeadLetterSourceQueuesAsync

listDeadLetterSourceQueuesAsync

setQueueAttributes

changeMessageVisibilityBatch

changeMessageVisibility

getQueueUrl

removePermission

sendMessageBatch

deleteQueue

sendMessage

receiveMessage

listQueues

deleteMessageBatch

createQueue

addPermission