AWSEC2ReplaceNetworkAclEntryRequest

Objective-C

@interface AWSEC2ReplaceNetworkAclEntryRequest

Swift

class AWSEC2ReplaceNetworkAclEntryRequest
  • The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24).

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable cidrBlock;

    Swift

    var cidrBlock: String? { get set }
  • Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable dryRun;

    Swift

    var dryRun: NSNumber? { get set }
  • Indicates whether to replace the egress rule.

    Default: If no value is specified, we replace the ingress rule.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable egress;

    Swift

    var egress: NSNumber? { get set }
  • ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

    Declaration

    Objective-C

    @property (nonatomic, strong) AWSEC2IcmpTypeCode *_Nullable icmpTypeCode;

    Swift

    var icmpTypeCode: AWSEC2IcmpTypeCode? { get set }
  • The IPv6 network range to allow or deny, in CIDR notation (for example 2001:bd8:1234:1a00::/64).

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable ipv6CidrBlock;

    Swift

    var ipv6CidrBlock: String? { get set }
  • The ID of the ACL.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable networkAclId;

    Swift

    var networkAclId: String? { get set }
  • TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

    Declaration

    Objective-C

    @property (nonatomic, strong) AWSEC2PortRange *_Nullable portRange;

    Swift

    var portRange: AWSEC2PortRange? { get set }
  • The protocol number. A value of “-1” means all protocols. If you specify “-1” or a protocol number other than “6” (TCP), “17” (UDP), or “1” (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol “58” (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol “58” (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable protocols;

    Swift

    var protocols: String? { get set }
  • Indicates whether to allow or deny the traffic that matches the rule.

    Declaration

    Objective-C

    @property (nonatomic) AWSEC2RuleAction ruleAction;

    Swift

    var ruleAction: AWSEC2RuleAction { get set }
  • The rule number of the entry to replace.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable ruleNumber;

    Swift

    var ruleNumber: NSNumber? { get set }