AWSElasticLoadBalancingCreateTargetGroupInput

Objective-C

@interface AWSElasticLoadBalancingCreateTargetGroupInput

Swift

class AWSElasticLoadBalancingCreateTargetGroupInput
  • Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance, ip, or alb, health checks are always enabled and cannot be disabled.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable healthCheckEnabled;

    Swift

    var healthCheckEnabled: NSNumber? { get set }
  • The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds. If the target group protocol is GENEVE, the default is 10 seconds. If the target type is lambda, the default is 35 seconds.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable healthCheckIntervalSeconds;

    Swift

    var healthCheckIntervalSeconds: NSNumber? { get set }
  • [HTTP/HTTPS health checks] The destination for health checks on the targets.

    [HTTP1 or HTTP2 protocol version] The ping path. The default is /.

    [GRPC protocol version] The path of a custom health check method with the format /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable healthCheckPath;

    Swift

    var healthCheckPath: String? { get set }
  • The port the load balancer uses when performing health checks on targets. If the protocol is HTTP, HTTPS, TCP, TLS, UDP, or TCP_UDP, the default is traffic-port, which is the port on which each target receives traffic from the load balancer. If the protocol is GENEVE, the default is port 80.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable healthCheckPort;

    Swift

    var healthCheckPort: String? { get set }
  • The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default is TCP. The TCP protocol is not supported for health checks if the protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are not supported for health checks.

    Declaration

    Objective-C

    @property (nonatomic) AWSElasticLoadBalancingProtocolEnum healthCheckProtocol;

    Swift

    var healthCheckProtocol: AWSElasticLoadBalancingProtocolEnum { get set }
  • The amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If the target type is lambda, the default is 30 seconds.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable healthCheckTimeoutSeconds;

    Swift

    var healthCheckTimeoutSeconds: NSNumber? { get set }
  • The number of consecutive health check successes required before considering a target healthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target groups with a protocol of GENEVE, the default is 5. If the target type is lambda, the default is 5.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable healthyThresholdCount;

    Swift

    var healthyThresholdCount: NSNumber? { get set }
  • The type of IP address used for this target group. The possible values are ipv4 and ipv6. This is an optional parameter. If not specified, the IP address type defaults to ipv4.

    Declaration

    Objective-C

    @property (nonatomic) AWSElasticLoadBalancingTargetGroupIpAddressTypeEnum ipAddressType;

    Swift

    var ipAddressType: AWSElasticLoadBalancingTargetGroupIpAddressTypeEnum { get set }
  • [HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target groups with a protocol of GENEVE, the range is 200-399.

    Declaration

    Objective-C

    @property (nonatomic, strong) AWSElasticLoadBalancingMatcher *_Nullable matcher;

    Swift

    var matcher: AWSElasticLoadBalancingMatcher? { get set }
  • The name of the target group.

    This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable name;

    Swift

    var name: String? { get set }
  • The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply. If the protocol is GENEVE, the supported port is 6081.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable port;

    Swift

    var port: NSNumber? { get set }
  • The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a Lambda function, this parameter does not apply.

    Declaration

    Objective-C

    @property (nonatomic) AWSElasticLoadBalancingProtocolEnum protocols;

    Swift

    var protocols: AWSElasticLoadBalancingProtocolEnum { get set }
  • [HTTP/HTTPS protocol] The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests to targets using HTTP/1.1.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable protocolVersion;

    Swift

    var protocolVersion: String? { get set }
  • The tags to assign to the target group.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSArray<AWSElasticLoadBalancingTag *> *_Nullable tags;

    Swift

    var tags: [AWSElasticLoadBalancingTag]? { get set }
  • The type of target that you must specify when registering targets with this target group. You can’t specify targets for a target group using more than one target type.

    • instance - Register targets by instance ID. This is the default value.

    • ip - Register targets by IP address. You can specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can’t specify publicly routable IP addresses.

    • lambda - Register a single Lambda function as a target.

    • alb - Register a single Application Load Balancer as a target.

    Declaration

    Objective-C

    @property (nonatomic) AWSElasticLoadBalancingTargetTypeEnum targetType;

    Swift

    var targetType: AWSElasticLoadBalancingTargetTypeEnum { get set }
  • The number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target groups with a protocol of GENEVE, the default is 2. If the target type is lambda, the default is 5.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSNumber *_Nullable unhealthyThresholdCount;

    Swift

    var unhealthyThresholdCount: NSNumber? { get set }
  • The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply. Otherwise, this parameter is required.

    Declaration

    Objective-C

    @property (nonatomic, strong) NSString *_Nullable vpcId;

    Swift

    var vpcId: String? { get set }